How to Install a Wooden Stockade Fence. Plan for the fence. Measure your fencing. Set stakes for your line posts by measure on center from one post to the next using the panel measurement. Dig your post holes. Set the end and corner posts. Set the line posts. Install the panels.
Mark the area for the fence with a string line, inserting a wooden stake in each corner for the fence and tying a string tightly to each stake. Mark the location for each fence post so that the distance between each 4-by-4-inch fence post is exactly 8 feet to accommodate 8-foot-long 2-by-4-inch horizontal cross braces.
Installing a stockade fence can be rather time consuming and somewhat difficult. However, you will find that it is all worth it in the end whenever you have a .
The experts at DIY Network show you how to get the most out of your new fence by employing these installation tips.
Install the Fence Pickets. Install corner pickets at the desired height and tap a nail into the top of each picket. Run a string between the nails. Line up the tops of the remaining pickets with the string. Don't push on the string while installing. Helpful if the slope in an area doesn't change much.
Get the assurance of privacy and security by installing stockade fencing on your property. Contact Frederick Fence for a quote on economical stockade fences.
How to Install a Privacy Fence. Fencing can be an important part of your home's exterior design. Fencing not only adds privacy and security to your home, it also .