Method 2. Repairing the Chain Mesh. Use pliers to detach the top rail's wire ties. Remove the lower wire ties to free the damaged wires. Pull the wires up from the fence to remove them. Cut the chain link fabric to size. Weave the new wires into the fence. Tie the wire to the top rail. Tighten the chain link mesh.
A damaged chain link fence rail can easily be repaired by cutting out the bad section and sliding in a new piece. Learn how from our fence experts.
You may need to conduct repairs to a chain link fence for a number of reasons: a tree fell on it during a storm, it was cut by trespassers, or it stretched and .
They are especially effective against animals, but that effectiveness will wane when a hole appears in the chain link fence. There is no reason to replace the .
Installing the Chain Link. Unroll the mesh and install a tension bar. Attach the tension bar to the posts. Stretch the mesh. Tighten the mesh. Insert a tension bar. Attach the tension bar. Tie the fence to the rails. Run wire through the bottom loops of mesh.
Chain link is a common material used to erect fencing because of its durability and relatively low cost compared to other fencing materials. Most chain link is .
Keep the straps loose enough so that you can slide the hinges up and down on the gate frame, since you will need to adjust them once the gate is in position.